UCL2001 Cable Fault Tester

Usage

This UCL2001 Cable Fault Tester is a comprehensive set of cable fault detection equipment. It can be used to detect flash-over cable fault, the earthing of the resistance, short circuit , cable break, and poor contact,with acoustic instrument, the exact location of the fault can be accurately detected. This tester is particularly suitable for testing voltage power cables and communication cables in various models and different levels

Feature

n Fully Featured

n High precision

n High intelligence

n The waveform and data can be stored and tuned out

n The waveform and data can be stored and tuned out

n It can show the dual trace

n It can compare the fault waveform with normal waveform, which is conductive to further determine the fault　　

n It can extended the proportional of the waveform

n If the waveform proportion changed, the accurate testing can be achieved

n The position of the double cursor can be changed as you like, it can show the direct distance or the relative distance of the fault point and the tested point

n It can modify the transmission speed with different tested-cable

n The small size makes it portable and the built-in rechargeable battery makes it easy to carry and use

Technical Parameters

n Farthest test distance: 15Km (open wire up to 100 km)

n Detection blind area : 1m

n Data-reading resolution: 1m

n Power dissipation : 5VA

n Conditions of Use: Ambient temperature 0 ℃ ~ + 40 ℃(Limit temperature -10 ℃ ~ + 50 ℃) Relative humidity 40 ℃ (20 ~ 90)% RH Atmospheric pressure (86 ~ 106) Kpa

n Volume: 275 × 220 × 160mm3

n Weight: 1.8kg

Cable Fault Tester

                                                                                 AC/DC Testing Transformer                                Control Unit                                    Pulse Capacitor